corwin_x
09-05-2010, 17:20
Hello,
I have some strange printing problem. My printer is Epson DX4400, I have Windows 7 on my notebook. When the printer gets into standby mode and I try to print something, the printer gets shut down and I have to turn it on and print again. When the printer is turned on, or connected directly to the notebook, everything goes fine.
The printer is connected and recognized:
ls /dev/usb
lp0
I use the samba which came with the firmware.
On windows, the printing mode RAW is selected on port 9100.
dmesg (not sure what is important, sorry about unnecessary lines):
usb.c: USB disconnect on device 01:03.0-2 address 2
printer.c: usblp0: nonzero read/write bulk status received: -145
printer.c: usblp0: removed
hub.c: new USB device 01:03.0-2, assigned address 3
printer.c: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x04B8 pid 0x083F
printer.c: usblp0 Device ID string [91]='MFG:EPSON;CMD:ESCPL2,BDC,D4,D4PX;MDL:Stylus DX4400;CLASS:PRINTER;DES:EPSON Stylus DX4400;'
ps aux
USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND
admin 1 0.0 1.7 1312 520 ? S 09:05 0:01 /sbin/init
admin 2 0.0 0.0 0 0 ? S 09:05 0:00 [keventd]
admin 3 0.0 0.0 0 0 ? RN 09:05 0:00 [ksoftirqd_CPU0]
admin 4 0.0 0.0 0 0 ? S 09:05 0:00 [kswapd]
admin 5 0.0 0.0 0 0 ? S 09:05 0:00 [bdflush]
admin 6 0.0 0.0 0 0 ? S 09:05 0:00 [kupdated]
admin 7 0.0 0.0 0 0 ? S 09:05 0:00 [mtdblockd]
admin 64 0.0 1.2 1532 376 ? Ss 09:05 0:00 syslogd -m 0 -O /tmp/syslog.log -S -l 7 -b 2
admin 65 0.0 1.1 1528 344 ? Ss 09:05 0:00 klogd
admin 66 0.0 1.2 1092 368 ? S 09:05 0:00 httpd
admin 67 0.0 1.3 1096 416 ? S 09:05 0:00 dropbear
admin 68 0.0 1.6 1076 484 ? Ss 09:05 0:00 nas /tmp/nas.lan.conf /tmp/nas.lan.pid lan
admin 70 0.0 0.0 0 0 ? S 09:05 0:00 [khubd]
admin 79 0.0 1.0 668 300 ? Ss 09:05 0:00 p9100d -f /dev/usb/lp0 0
admin 82 0.0 1.1 1304 332 ? Ss 09:05 0:00 waveservermain
admin 87 0.0 0.9 892 292 ? Ss 09:05 0:00 infosvr br0
admin 88 0.0 1.5 1324 468 ? Ss 09:05 0:00 watchdog
admin 94 0.0 0.0 0 0 ? S 09:05 0:00 [usb-storage-0]
admin 95 0.0 0.0 0 0 ? S 09:05 0:00 [scsi_eh_0]
admin 105 0.0 0.0 0 0 ? S 09:06 0:00 [kjournald]
admin 106 0.0 0.0 0 0 ? S 09:06 0:00 [kjournald]
admin 109 0.0 1.1 944 344 ? Ss 09:06 0:00 /usr/sbin/vsftpd
admin 111 0.0 3.0 1740 904 ? Ss 09:06 0:00 /usr/sbin/nmbd -D
admin 113 0.0 3.0 1972 920 ? Ss 09:06 0:00 /usr/sbin/smbd -D
admin 124 0.0 1.3 972 408 ? Ss 09:06 0:00 /opt/sbin/cron
admin 129 0.0 1.9 1376 572 ? Ss 09:06 0:00 /opt/sbin/xinetd
admin 143 0.0 3.7 3904 1132 ? S 09:06 0:00 /opt/sbin/lighttpd -f /opt/etc/lighttpd/lighttpd.conf
admin 144 0.0 16.2 18668 4864 ? Ss 09:06 0:00 /opt/bin/php-fcgi
admin 145 0.0 16.2 18696 4868 ? S 09:06 0:00 /opt/bin/php-fcgi
admin 3671 0.0 4.0 2768 1220 ? S 15:53 0:00 /usr/sbin/smbd -D
admin 3680 0.0 2.0 1160 600 ? Ss 15:54 0:01 dropbear
admin 3681 0.0 1.6 1536 484 pts/0 Ss 15:54 0:00 -sh
admin 3693 0.0 4.0 2768 1216 ? S 15:55 0:00 /usr/sbin/smbd -D
Any help would be greatly appreciated.
I have some strange printing problem. My printer is Epson DX4400, I have Windows 7 on my notebook. When the printer gets into standby mode and I try to print something, the printer gets shut down and I have to turn it on and print again. When the printer is turned on, or connected directly to the notebook, everything goes fine.
The printer is connected and recognized:
ls /dev/usb
lp0
I use the samba which came with the firmware.
On windows, the printing mode RAW is selected on port 9100.
dmesg (not sure what is important, sorry about unnecessary lines):
usb.c: USB disconnect on device 01:03.0-2 address 2
printer.c: usblp0: nonzero read/write bulk status received: -145
printer.c: usblp0: removed
hub.c: new USB device 01:03.0-2, assigned address 3
printer.c: usblp0: USB Bidirectional printer dev 3 if 1 alt 0 proto 2 vid 0x04B8 pid 0x083F
printer.c: usblp0 Device ID string [91]='MFG:EPSON;CMD:ESCPL2,BDC,D4,D4PX;MDL:Stylus DX4400;CLASS:PRINTER;DES:EPSON Stylus DX4400;'
ps aux
USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND
admin 1 0.0 1.7 1312 520 ? S 09:05 0:01 /sbin/init
admin 2 0.0 0.0 0 0 ? S 09:05 0:00 [keventd]
admin 3 0.0 0.0 0 0 ? RN 09:05 0:00 [ksoftirqd_CPU0]
admin 4 0.0 0.0 0 0 ? S 09:05 0:00 [kswapd]
admin 5 0.0 0.0 0 0 ? S 09:05 0:00 [bdflush]
admin 6 0.0 0.0 0 0 ? S 09:05 0:00 [kupdated]
admin 7 0.0 0.0 0 0 ? S 09:05 0:00 [mtdblockd]
admin 64 0.0 1.2 1532 376 ? Ss 09:05 0:00 syslogd -m 0 -O /tmp/syslog.log -S -l 7 -b 2
admin 65 0.0 1.1 1528 344 ? Ss 09:05 0:00 klogd
admin 66 0.0 1.2 1092 368 ? S 09:05 0:00 httpd
admin 67 0.0 1.3 1096 416 ? S 09:05 0:00 dropbear
admin 68 0.0 1.6 1076 484 ? Ss 09:05 0:00 nas /tmp/nas.lan.conf /tmp/nas.lan.pid lan
admin 70 0.0 0.0 0 0 ? S 09:05 0:00 [khubd]
admin 79 0.0 1.0 668 300 ? Ss 09:05 0:00 p9100d -f /dev/usb/lp0 0
admin 82 0.0 1.1 1304 332 ? Ss 09:05 0:00 waveservermain
admin 87 0.0 0.9 892 292 ? Ss 09:05 0:00 infosvr br0
admin 88 0.0 1.5 1324 468 ? Ss 09:05 0:00 watchdog
admin 94 0.0 0.0 0 0 ? S 09:05 0:00 [usb-storage-0]
admin 95 0.0 0.0 0 0 ? S 09:05 0:00 [scsi_eh_0]
admin 105 0.0 0.0 0 0 ? S 09:06 0:00 [kjournald]
admin 106 0.0 0.0 0 0 ? S 09:06 0:00 [kjournald]
admin 109 0.0 1.1 944 344 ? Ss 09:06 0:00 /usr/sbin/vsftpd
admin 111 0.0 3.0 1740 904 ? Ss 09:06 0:00 /usr/sbin/nmbd -D
admin 113 0.0 3.0 1972 920 ? Ss 09:06 0:00 /usr/sbin/smbd -D
admin 124 0.0 1.3 972 408 ? Ss 09:06 0:00 /opt/sbin/cron
admin 129 0.0 1.9 1376 572 ? Ss 09:06 0:00 /opt/sbin/xinetd
admin 143 0.0 3.7 3904 1132 ? S 09:06 0:00 /opt/sbin/lighttpd -f /opt/etc/lighttpd/lighttpd.conf
admin 144 0.0 16.2 18668 4864 ? Ss 09:06 0:00 /opt/bin/php-fcgi
admin 145 0.0 16.2 18696 4868 ? S 09:06 0:00 /opt/bin/php-fcgi
admin 3671 0.0 4.0 2768 1220 ? S 15:53 0:00 /usr/sbin/smbd -D
admin 3680 0.0 2.0 1160 600 ? Ss 15:54 0:01 dropbear
admin 3681 0.0 1.6 1536 484 pts/0 Ss 15:54 0:00 -sh
admin 3693 0.0 4.0 2768 1216 ? S 15:55 0:00 /usr/sbin/smbd -D
Any help would be greatly appreciated.