elbahek
30-01-2010, 12:26
After successful flashing through tftp router stop responding to ping and i can't get access to it.
Before that, i've
1. succesfully installed oleg firmware 1.9.2.7d-r1087 and set router ip address to auto to get ip from my isp. That was a mistake, i couldn't access router after
2. I reboot into diag mode and flashed (through tftp) wl-500g-clear-nvram, wl-500g-restore and then oleg firmware - still can't get access
3. Tried wl-500g-clear-nvram, wl-500g-restore and asus original WL500gpv2_3.0.3.8_TW - no ping, can't get access
So the problem essentialy is:
i can find router while it is in diag mode and flash any firmware
but after the flashing i get no response
Please, explain what i have to do to repair it and flash oleg firmware.
p.s. Firmware tool cannot find router and stucks at seacrhing for ip, so i flashed through tftp
Before that, i've
1. succesfully installed oleg firmware 1.9.2.7d-r1087 and set router ip address to auto to get ip from my isp. That was a mistake, i couldn't access router after
2. I reboot into diag mode and flashed (through tftp) wl-500g-clear-nvram, wl-500g-restore and then oleg firmware - still can't get access
3. Tried wl-500g-clear-nvram, wl-500g-restore and asus original WL500gpv2_3.0.3.8_TW - no ping, can't get access
So the problem essentialy is:
i can find router while it is in diag mode and flash any firmware
but after the flashing i get no response
Please, explain what i have to do to repair it and flash oleg firmware.
p.s. Firmware tool cannot find router and stucks at seacrhing for ip, so i flashed through tftp