PDA

Bekijk de volledige versie : Firmware WL500g-1.9.2.7-3c-CDMA-1.55



joshi
21-03-2005, 21:13
I find another firmware release ,working great.
http://koppel.cz/cdmawifi


http://koppel.cz/cdmawifi/download/155/WL500g-1.9.2.7-3c-CDMA-1.55.trx

SNMPd is in it.

britnet
22-03-2005, 08:52
In the new version the firmware supports up to 32 bandwith rules.

http://koppel.cz/cdmawifi/download/History

Probably this Forum an the czech Forum could work together.

But pleeeaaase in English!! :rolleyes: :rolleyes:

engy
22-03-2005, 10:01
Yes.
It's our modification of Oleg's firmware to support USB GTRAN modem for CDMA EV-DO which runs on 450MHz. This wireless technology is only in Czech republic.

mr0mega
22-03-2005, 15:46
Wow, it looks like it may help my networking problem, does the VPN allow me access to a usb disk in the router?

Also, is the interface in English?

engy
22-03-2005, 15:51
No. It's only in czech because CDMA is only in czech. USB disk is accessible via FTP.

petgun
22-03-2005, 16:05
No. It's only in czech...
..that is a political reason..not technical?

engy
22-03-2005, 16:08
Yes. When CDMA and our firmware modification will by widely used, it will by also in english.

taufer
22-03-2005, 20:12
Here is the link to source code for this version

http://koppel.cz/cdmawifi/download/155/cdma-1.9.2.7-3c-CDMA-1.55.tar.gz

Oleg
22-03-2005, 20:40
I've no much time to extract extra patches from source code (if there are any), so authors are appreciated to do this and send it to me.

anetea
24-03-2005, 20:27
CDMA in Romania

http://www.zapp.ro/terminals/z010/

Aurel

Snufkin
24-03-2005, 21:51
CDMA in Romania

http://www.zapp.ro/terminals/z010/

Aurel

and in Russia as well

SKYLINK (http://www.skylink.ru/)

Tcheno
13-04-2005, 21:24
Hi to you all,
Just here to C if we could work out a CDMA2000 Firmware distro.

There is a company here at Portugal implementing a CDMA2000 network (Zapp.pt (http://www.zapp.pt)) and the release of such a Firmware would be very apreciated by all of us.

If you have intrest don't hesitate in contacting me by MAIL (ruben.sacramento@zapp.com.pt)

Regards
Tcheno

Antiloop
27-04-2005, 00:26
ok.. I'm curious.. what is this exactly ?

how far does it reach ? is this gsm alike technique or is this specially for users or something ?

engy
27-04-2005, 07:49
Hi.
Here is page in English about CDMA in Czech republic
http://www.eurotel.cz/jnp/en/services/service/en-services-dataContainer-S4_InternetAemail-EurotelDataExpres-uvod.html
And with coverage
http://www.eurotel.cz/jnp/en/services/service/en-services-dataContainer-S4_InternetAemail-EurotelDataExpres-pokryti.html
23 CZK = 1 USD
It's 3G CDMA EV-DO (Data optimized) data only network with max 2Mbps download and 160kbps upload. Ping is 200 ms, in rev. A will be 20ms.

I'm 15km far from BTS and at night it works at 1Mbps and over and at day time at 300kpbs. It's an only one solution in small villages without ADSL.

Antiloop
27-04-2005, 09:32
Hi.
Here is page in English about CDMA in Czech republic
http://www.eurotel.cz/jnp/en/services/service/en-services-dataContainer-S4_InternetAemail-EurotelDataExpres-uvod.html
And with coverage
http://www.eurotel.cz/jnp/en/services/service/en-services-dataContainer-S4_InternetAemail-EurotelDataExpres-pokryti.html
23 CZK = 1 USD
It's 3G CDMA EV-DO (Data optimized) data only network with max 2Mbps download and 160kbps upload. Ping is 200 ms, in rev. A will be 20ms.

I'm 15km far from BTS and at night it works at 1Mbps and over and at day time at 300kpbs. It's an only one solution in small villages without ADSL.
ok thus just another one like UMTS / GPRS / EDGE bla bla bla

but have to say ~30 euro's is not that much for a flat fee (?) for stuff you can almost use everywhere you want.

tx for the info :)

rexster
26-05-2005, 09:49
is the firmware interface in english?
if not, any english version?

will Oleg's fw ever support gprs/cdma modem?

i think it'll be great to put gprs/cdma modem support into fw.

my plan is to plug my gprs/cdma modem into wl500g/x and put it on my car with a modified power supply.
so i'd got a truely mobile hotspot. anywhere you see my car you can use the hotspot...

herrisom
19-08-2005, 16:49
Unfortunaelly the .cz firmware for wl-500gx contains a ppp not compiled with support for active-filter.

I guess even using iptable I still not able to stop internet since idle time is never reached due to misc incoming packages.

Could it be possible to include ppp filtering in a new firmware or provide a ppp package with support for acrive-filter (I'm interested in outbound keyword).

Please help me or provide me an alternative to be able to ignore incoming packets when dial on demand is used with pppd.

Thanks a lot

cfree
14-06-2006, 23:38
So has a CDMA package been developed for Oleg's software?

Can't really try Oleg's as I'm CDMA dependant for the internet.

tanx

Asmadei
17-06-2006, 15:36
in this firmware exist property " use my dialup file"
There are i can get this files, and read about this?
And what is structures of this files?

skier
19-04-2007, 15:13
Hi Everyone,

I was visiting http://koppel.cz/cdmawifi/download/164/WL500g-1.9.2.7-7f-USB-1.64.trx,
and found out that they have a new soft for WL500g. This soft allows to plug 2 CDMA modem and have internet VIA WIFI. There are 2 models that are supported by this software. AnydataADU-E100H and one more model. I use C-Montech CNU-550. Can anybody help to modify the 1.9.2.7-7f-USB-1.64.trx in a such way that my modem will work.
WL500GX recognizes the modem very well. Here is the log
System Log from My Asus WL500gx, after inserting the CNU-550. C-Montech

Apr 19 17:51:43 kernel: usb.c: USB disconnect on device 01:02.2-2 address 2
Apr 19 17:51:44 nmbd[136]: [2007/04/19 17:51:44, 0] nmbd/nmbd.c:sig_term(65)
Apr 19 17:51:44 nmbd[136]: Got SIGTERM: going down...
Apr 19 17:51:45 USB storage: removed
Apr 19 17:51:45 kernel: Device 08:05 not ready.
Apr 19 17:51:45 kernel: I/O error: dev 08:05, sector 1
Apr 19 17:51:57 kernel: hub.c: new USB device 01:02.0-2, assigned address 2
Apr 19 17:51:57 kernel: Manufacturer: CMOTECH CO., LTD.
Apr 19 17:51:57 kernel: Product: CMOTECH CDMA Technologies
Apr 19 17:51:58 kernel: SerialNumber: Serial Number
Apr 19 17:51:58 kernel: usb.c: USB device 2 (vend/prod 0x16d8/0x5543) is not claimed by any active driver.
Apr 19 17:51:58 kernel: Length = 18
Apr 19 17:51:58 kernel: DescriptorType = 01
Apr 19 17:51:58 kernel: USB version = 2.00
Apr 19 17:51:58 kernel: Vendor:Product = 16d8:5543
Apr 19 17:51:58 kernel: MaxPacketSize0 = 16
Apr 19 17:51:58 kernel: NumConfigurations = 1
Apr 19 17:51:58 kernel: Device version = 0.00
Apr 19 17:51:58 kernel: Device Class:SubClass:Protocol = 02:00:00
Apr 19 17:51:58 kernel: Communications class
Apr 19 17:51:58 kernel: Configuration:
Apr 19 17:51:58 kernel: bLength = 9
Apr 19 17:51:58 kernel: bDescriptorType = 02
Apr 19 17:51:58 kernel: wTotalLength = 005a
Apr 19 17:51:58 kernel: bNumInterfaces = 03
Apr 19 17:51:58 kernel: bConfigurationValue = 01
Apr 19 17:51:58 kernel: iConfiguration = 00
Apr 19 17:51:58 kernel: bmAttributes = 80
Apr 19 17:51:58 kernel: MaxPower = 100mA
Apr 19 17:51:58 kernel:
Apr 19 17:51:58 kernel: Interface: 0
Apr 19 17:51:58 kernel: Alternate Setting: 0
Apr 19 17:51:58 kernel: bLength = 9
Apr 19 17:51:58 kernel: bDescriptorType = 04
Apr 19 17:51:58 kernel: bInterfaceNumber = 00
Apr 19 17:51:58 kernel: bAlternateSetting = 00
Apr 19 17:51:58 kernel: bNumEndpoints = 01
Apr 19 17:51:58 kernel: bInterface Class:SubClass:Protocol = 02:02:01
Apr 19 17:51:58 kernel: iInterface = 00
Apr 19 17:51:58 kernel: Endpoint:
Apr 19 17:51:58 kernel: bLength = 7
Apr 19 17:51:58 kernel: bDescriptorType = 05
Apr 19 17:51:58 kernel: bEndpointAddress = 81 (in)
Apr 19 17:51:58 kernel: bmAttributes = 03 (Interrupt)
Apr 19 17:51:58 kernel: wMaxPacketSize = 0010
Apr 19 17:51:58 kernel: bInterval = 20
Apr 19 17:51:58 kernel:
Apr 19 17:51:58 kernel: Interface: 1
Apr 19 17:51:58 kernel: Alternate Setting: 0
Apr 19 17:51:58 kernel: bLength = 9
Apr 19 17:51:58 kernel: bDescriptorType = 04
Apr 19 17:51:58 kernel: bInterfaceNumber = 01
Apr 19 17:51:58 kernel: bAlternateSetting = 00
Apr 19 17:51:58 kernel: bNumEndpoints = 02
Apr 19 17:51:58 kernel: bInterface Class:SubClass:Protocol = 0a:00:00
Apr 19 17:51:58 kernel: iInterface = 04
Apr 19 17:51:58 kernel: Endpoint:
Apr 19 17:51:58 kernel: bLength = 7
Apr 19 17:51:58 kernel: bDescriptorType = 05
Apr 19 17:51:58 kernel: bEndpointAddress = 8a (in)
Apr 19 17:51:58 kernel: bmAttributes = 02 (Bulk)
Apr 19 17:51:58 kernel: wMaxPacketSize = 0040
Apr 19 17:51:58 kernel: bInterval = 00
Apr 19 17:51:58 kernel: Endpoint:
Apr 19 17:51:58 kernel: bLength = 7
Apr 19 17:51:58 kernel: bDescriptorType = 05
Apr 19 17:51:58 kernel: bEndpointAddress = 0b (out)
Apr 19 17:51:58 kernel: bmAttributes = 02 (Bulk)
Apr 19 17:51:58 kernel: wMaxPacketSize = 0040
Apr 19 17:51:58 kernel: bInterval = 00
Apr 19 17:51:58 kernel:
Apr 19 17:51:58 kernel: Interface: 2
Apr 19 17:51:58 kernel: Alternate Setting: 0
Apr 19 17:51:58 kernel: bLength = 9
Apr 19 17:51:58 kernel: bDescriptorType = 04
Apr 19 17:51:58 kernel: bInterfaceNumber = 02
Apr 19 17:51:58 kernel: bAlternateSetting = 00
Apr 19 17:51:58 kernel: bNumEndpoints = 02
Apr 19 17:51:58 kernel: bInterface Class:SubClass:Protocol = ff:ff:ff
Apr 19 17:51:58 kernel: iInterface = 04
Apr 19 17:51:58 kernel: Endpoint:
Apr 19 17:51:58 kernel: bLength = 7
Apr 19 17:51:58 kernel: bDescriptorType = 05
Apr 19 17:51:58 kernel: bEndpointAddress = 82 (in)
Apr 19 17:51:58 kernel: bmAttributes = 02 (Bulk)
Apr 19 17:51:58 kernel: wMaxPacketSize = 0040
Apr 19 17:51:58 kernel: bInterval = 00
Apr 19 17:51:58 kernel: Endpoint:
Apr 19 17:51:58 kernel: bLength = 7
Apr 19 17:51:58 kernel: bDescriptorType = 05
Apr 19 17:51:58 kernel: bEndpointAddress = 05 (out)
Apr 19 17:51:58 kernel: bmAttributes = 02 (Bulk)
Apr 19 17:51:58 kernel: wMaxPacketSize = 0040
Apr 19 17:51:58 kernel: bInterval = 00

I think I need to use this script.

921600

connect '/usr/sbin/chat -s -v "" "AT&F0E0V1S0=0" OK ATD#777 CONNECT'

debug

updetach

crtscts

noipdefault

nodetach

novj

lcp-echo-failure 0

nobsdcomp

novjccomp

nopcomp

noaccomp

noauth

user mobile

modem

usepeerdns

defaultroute

connect-delay 5000


Thanks in Advance.

alien433
21-04-2007, 11:57
I think you better ask the person who wrote this firmware. He speaks very good english.

skier
21-04-2007, 19:59
Hi Alien433'

Are you from from Czech republic? That script was written by very smart guy from Czech republic. But I cannot speak czech and cannot find any information on that forum. If you can help to readdress my question?

Thanks in Advance.
Skier

engy
21-04-2007, 21:25
Yes it's me. There is no driver for Cmotech CDMA modem in firmware, so modifying script will not solve your problem. I'm very short of time now, so I cann't google for driver for this modem. When I will have a driver, I can modify CDMA script. Try insmod acm module and list usb devices (/proc/bus/usb/devices)

Engy

skier
22-04-2007, 06:20
Thank you Engy,

I will look for it. Thanks for the answer anyway.

Skier

skier
22-04-2007, 10:30
Engy,

Here is what I found. Will it work. Please read the line 797. It is for CNU-550

http://209.85.129.104/search?q=cache:4lDk3JWmuBMJ:fxr.watson.org/fxr/source/dev/usb/usbdevs+Linux+driver,+CNU-550,&hl=ru&ct=clnk&cd=1&gl=ru

Skier

engy
23-04-2007, 19:53
Engy,

Here is what I found. Will it work. Please read the line 797. It is for CNU-550

http://209.85.129.104/search?q=cache:4lDk3JWmuBMJ:fxr.watson.org/fxr/source/dev/usb/usbdevs+Linux+driver,+CNU-550,&hl=ru&ct=clnk&cd=1&gl=ru

Skier

This is not a driver. This is only list of vendor and product ID's.

skier
30-04-2007, 08:51
Engy,

Do I need to look for the Linux driver for CNU-550 or Regular Windows driver?

engy
30-04-2007, 18:48
Engy,

Do I need to look for the Linux driver for CNU-550 or Regular Windows driver?

Linux driver of course :-)

skier
06-05-2007, 07:01
Thanks Engy,

Will keep looking.

Sergei

rexster
09-05-2007, 09:58
cdma is now widely used worldwide.

it'll be extremely great if we can plug any cheap gprs/cdma/3g/nokia mobile phone into wl500g usb to have a real mobile hotspot.
coz, linksys wrt54g3g and its pccard is way too expensive...

tia

engy
10-05-2007, 09:35
cdma is now widely used worldwide.

it'll be extremely great if we can plug any cheap gprs/cdma/3g/nokia mobile phone into wl500g usb to have a real mobile hotspot.
coz, linksys wrt54g3g and its pccard is way too expensive...

tia

It's already possible with koppel firmware but the modem must be equiped with pl2303 or ftdi convertor or you need a driver.

skier
10-05-2007, 19:21
Hi Engy,

Please read below. I think I found what you need to modify the firmware.

Engy,

Here is the letter from the guy who changed the firmware for the similar CDMA mode.
Please read below. I trunslated it in English.

If you can change the Flash-file system for the Asus, you should put the following file from the attached archive to the folder
/usr/local/custom/

dial
dialup
dialup.chat
update

The file post-boot should be placed /usr/local/sbin/post-boot
More details about this issue at
http://oleg.wl500g.info,
http://www.wl500g.info/showthread.php?t=5909&highlight=mkswa
p).

In the above discribed files you should change the "vendor=0x16D8
product=0x5533" to the ID of your modem, you can find out about the ID at the Widows Device manager.
In UI Adam Firmware you should choose 'dialup', this is the one where you can find login/password/dial number.


Engy here is my Modem ID.
USB\Vid_16d8&Pid_5543&Rev_0000
USB\Vid_16d8&Pid_5543
Engy I am attaching the file on the bottom in russian. Just for your reference. This is the original.

Если Вы умеете менять flash-файловую систему на раутере, то
поместите следующие файлы из приаттаченного архива в папку
/usr/local/custom/

dial
dialup
dialup.chat
update

А файл post-boot поместить /usr/local/sbin/post-boot
(подробнее об этом http://oleg.wl500g.info,
http://www.wl500g.info/showthread.php?t=5909&highlight=mkswa
p).

В вашеперечисленных файлах поменяйте "vendor=0x16D8
product=0x5533" на ID Вашего модема, узнать ID можно в
Windows Device Manager.

В UI прошивки Адама нужно выбрать опцию 'dialup', это та,
где есть только login/password/dial number.

Skier.

engy
11-05-2007, 14:10
This is not a good usage of user dialup files. In attachement is a sample usage of user dialup files with koppel firmware. But this is not a driver for gprs device but only you tell to system to use usbserial module for your usb device with specified vid/pid.

skier
13-05-2007, 18:41
Engy,

Are you saying that this is not a good idea to use user dialup files this way?
And what every you attaching is the same thing from KOPPEL firmware.
Engy I will keep looking for Linux driver for my Modem, but I have no luck so far.
Would you still recommend to use it if I won't be able to find the driver?
How can I integrate it in WL500gx-1.9.2.7-7f-USB-1.64.trx?
Thanks in Advance for your advice.

Skier

skier
13-05-2007, 19:13
Engy,

Here what I found on one russian forum. Will it work as a driver?
They used it for Linux system, for my particular modem. Works fine.

1. modprobe cdc_acm
2. mknod /dev/usb/ttyACM0 c 166 0
3. Make a script /etc/ppp/peers/cdma-evdo:
921600
connect '/usr/sbin/chat -s -v "" "AT&F0E0V1S0=0" OK ATD#777 CONNECT'
debug
updetach
crtscts
noipdefault
nodetach
novj
lcp-echo-failure 0
nobsdcomp
novjccomp
nopcomp
noaccomp
noauth
user mobile
modem
usepeerdns
defaultroute
connect-delay 5000

4. В /etc/ppp/pap-secrets добавить
mobile * internet

5. pppd /dev/usb/ttyACM0 call cdma-evdo

6. Do not forget to copy after the first session resolv.conf из /etc/ppp в /etc
08.12.2006 01:19 (Msk) Neptune-1

engy
13-05-2007, 21:15
Engy,

Are you saying that this is not a good idea to use user dialup files this way?
And what every you attaching is the same thing from KOPPEL firmware.
Engy I will keep looking for Linux driver for my Modem, but I have no luck so far.
Would you still recommend to use it if I won't be able to find the driver?
How can I integrate it in WL500gx-1.9.2.7-7f-USB-1.64.trx?
Thanks in Advance for your advice.

Skier

In USB Connection select "User defined", upload my file and after reboot fill in connection paramaters. Some devices need special USB initializing and finalizing but usbserial driver is not able to do it, so legacy driver is a better solution.

skier
14-05-2007, 18:39
Hi Engy,

Sorry for asking the stupid question. But I am very new in it. What kind of program will you use to create the .gz.tar archives? I opened the archive with
WinRar and cannot create the right type of installation archive. I changed the VID and PID.

Skier.

skier
14-05-2007, 19:59
Engy,

Here is the attached archive with changed VID and PID.

Skier.

skier
15-05-2007, 20:26
Engy,

Finaly I made the file it in a right way. With the help of my LINUX friend. But it doesn't work. I am attaching the log. Can you say what is wrong. I am attaching the modified dialsample.tar.gz for my modem.



Skier

engy
15-05-2007, 20:30
Engy,

Finaly I made the file it in a right way. With the help of my LINUX friend. But it doesn't work. I am attaching the log. Can you say what is wrong. I am attaching the modified dialsample.tar.gz for my modem.



Skier

You have to look at /tmp/chat.log

skier
21-05-2007, 19:16
Hi Engy,

The new firmware from Adam
http://koppel.cz/cdmawifi/download/165/
works with my modem. Thanks a lot for your help.

Skier.

engy
22-05-2007, 07:24
Hi Engy,

The new firmware from Adam
http://koppel.cz/cdmawifi/download/165/
works with my modem. Thanks a lot for your help.

Skier.

Yes. It's my firmware. Is it working natively or with uploaded dial.tar.gz or via gprs and entered vid/pid ?

skier
27-05-2007, 13:58
Engy thanks a lot. Great work. Now a lot of people can use there modems with ASUS.

Thanks again.
Skier