paneidos
12-10-2008, 17:13
Hi,
I've used this forum to find help for configuring my WL-500g as a Wireless bridge.
With the help of previous posts on this forum I managed to even bridge a wired computer over WLAN.
This involved setting the 'Operating Mode' to 'Access Point' (IIRC, it's the bottom option on the config-page).
After that, it wouldn't allow my computer to be plugged in on LAN1-LAN4, but plugging it in the WAN-port did the job.
(FYI, it's a Linux-PC, but I can't get my Asus WL-138g to work under Linux.)
Everything worked well, for some weeks.
We moved and I decided to use the WL-500g as the main router. Just as I used it for years (before using it for WDS).
I reset the router about 8 times now, and still the LAN-/WAN-ports don't work.
I'm unable to flash the firmware, cause I need a LAN-connection for that.
Does anyone here have any idea what to do?
The WAN-port worked this morning, but after the reconfiguration it stopped working.
I want it to connect to my Ziggo-cable-modem (Ziggo is a dutch ISP).
The setup is like this:
Internet <---> Modem <---> WL-500g <---> PC's/Laptops
Settings:
Set using quick-setup, I chose for WAN=Automatic IP.
Manual setting it up gives the same result.
I DO get an IP on the Wireless, but the wired part doesn't give me an IP.
Please help. Thanks in advance.
I've used this forum to find help for configuring my WL-500g as a Wireless bridge.
With the help of previous posts on this forum I managed to even bridge a wired computer over WLAN.
This involved setting the 'Operating Mode' to 'Access Point' (IIRC, it's the bottom option on the config-page).
After that, it wouldn't allow my computer to be plugged in on LAN1-LAN4, but plugging it in the WAN-port did the job.
(FYI, it's a Linux-PC, but I can't get my Asus WL-138g to work under Linux.)
Everything worked well, for some weeks.
We moved and I decided to use the WL-500g as the main router. Just as I used it for years (before using it for WDS).
I reset the router about 8 times now, and still the LAN-/WAN-ports don't work.
I'm unable to flash the firmware, cause I need a LAN-connection for that.
Does anyone here have any idea what to do?
The WAN-port worked this morning, but after the reconfiguration it stopped working.
I want it to connect to my Ziggo-cable-modem (Ziggo is a dutch ISP).
The setup is like this:
Internet <---> Modem <---> WL-500g <---> PC's/Laptops
Settings:
Set using quick-setup, I chose for WAN=Automatic IP.
Manual setting it up gives the same result.
I DO get an IP on the Wireless, but the wired part doesn't give me an IP.
Please help. Thanks in advance.