Setting the internal clock

[gwl]

How can I (automatically) set the internal clock on the WL500G to sincronize with a time server?
which command line should be used?

thanks.

[Oleg]

Read user manual.

[gwl]

I did. It didn't work.
That's why i asked here for the command line...
:confused:

[Technik]

I did. It didn't work.
That's why i asked here for the command line...
:confused:
It works perfectly for sure. Try the different time server then.

[gwl]

It works now. I think the problems I had were caused by the firewall.
I tryed the ip of my dns server, and found out that it also provides ntp.
To anyone who might need it, here it is:

To set your router's clock just run:
ntpclient -s -h xxx.xxx.xxx.xxx

(where xxx.xxx.xxx.xxx is the ip of the ntp server)
(if you're behind a firewall and port "123" is blocked, just try to use the ip of your gateway and/or DNS server. )

[britnet]

It's possible with "dates" or "date" commad on telnet without internet connection.