PDA

Bekijk de volledige versie : must use ISP router, how to make wl700ge work on this



chlubb
06-07-2008, 19:13
I just got Verizon FIOS (cable type setup) for home and was using the WL700ge before with cable modem. Now I must use Verizons router and its a pain to change their IP config because its tied into the digital cable as well.
So how do I make the wl700ge a stand alone server as an accessory on their router while keeping the ftp capabilities?

When i first connected it, the local ip's were conflciting, as 192.168.1.1 and my computer would default to the ASUS with no net, blocking verizons.

I need to reconfigure the asus to not be used as a router, only for its ftp and hd server capabilities as a mapped drive.

Thanks,
Chris

LeperKing
06-07-2008, 19:56
Put it in AP mode with IP address 192.168.1.2 with gateway details set to 192.168.1.1.

chlubb
07-07-2008, 00:59
i changed those settings, however to 192.168.1.10, and now i cannot access the web interface on the device. I have connected it to my verizon router yet it still doesnt function nor is it seen at that ip above.

any thoughts would be great.

LeperKing
07-07-2008, 12:50
i changed those settings, however to 192.168.1.10, and now i cannot access the web interface on the device. I have connected it to my verizon router yet it still doesnt function nor is it seen at that ip above.

any thoughts would be great.

Is it responding to pings?

chlubb
07-07-2008, 14:24
no, not at that IP
and my Verizon router does not show the device as being connected nor anything listed at the 1.10 ip.

LeperKing
07-07-2008, 14:48
If you change to a static ip address, I think you have to unplug the wl700ge for the ip address change to take affect. I remember a message displayed on the IP config saying that had to be done.

You shouldn't see anything on the verizon router as its hasn't given out a DHCP address.

See attached with how mine is setup...........

LK

chlubb
07-07-2008, 14:52
LK,
Thanks. I will review that except that I cannot access the web interface since changing it from Gateway to AP yesterday.
I believe I need to do a button reset, do you concur?

Is it 100% certain that I will not lose HD data while doing this?


TIA,
Chris

LeperKing
07-07-2008, 14:58
If you've lost contact with the wl700ge, use the asus device discovery utility. It has saved me a number of times.

Regrading the reset. All I can say is that I've never lost files from a reset or a firmware upgrade. That has been my personal experience.

LK

chlubb
07-07-2008, 15:40
thanks, this worked like a charm. your help was incredibly appreciated.

chris

chlubb
07-07-2008, 17:52
is it possible to use my asus router, now as an AP, as a switch also to handle more network connections?
I am 1 short on my verizon router, can this pass through the Asus?

Chris

LeperKing
07-07-2008, 18:33
is it possible to use my asus router, now as an AP, as a switch also to handle more network connections?
I am 1 short on my verizon router, can this pass through the Asus?

Chris

Yes, wireless and wired.

chlubb
07-07-2008, 21:31
how do i setup the asus to work as a pass through switch to the verizon router? i need to connect my networked printer in a LAN slot on the asus.

Right now the Asus is connected LAN to LAN with the verizon.

Thanks,
Chris