config wireless

[bruno77]

hi
i have wl500g ( firm 1927 )connected to 3pc ethernet ( works fine)
i would like to connect my pda a620 + wl110 card to wl500g.

i instal wifime( the update one) on pda and connection is correct; but i cannot connect to internet.
Who can help me to config wireless of wl500g. i want to connect my pda to internet and if possible to my lan ( 192.168.1.2 ....)
wl500g is 192.168.1.1
lan is 192.168.1. .......
auto ip of pda is 192.168.1. ... detect well dns and gateway
ping to pda is ok

in wl500g there are a few parameters:
interface
bridge
access control
radius
advanced
and i am probably not enough clever to understand all

maybe something in firewall disable wireless conection to internet ?
thanks

[chupra]

i instal wifime( the update one) on pda and connection is correct; but i cannot connect to internet.

If you can ping the PDA from the computers on your LAN, then the wireless connection is well established, and probably you don't need to touch any of the parameters in WiFi section on the wl500g. Try to ping the other computers from the PDA. If that works, check the DNS configuration. One other thing to mention is the MAC filter on the Internet Firewall page on the wl500g...see if you have some restrictions there.

[hugo]

If your PDA can connect to some website, but not to other, then it is a MTU setting problem. Try different webpages to be sure, as some might work and not other. If it is the case, set your MTU value to something lower on the router. (1480 for most of french providers)

My PDA can surf on the web without any special config. If your PC can connect, your PDA can.