View Full Version : Signal monitoring utility for Windows
For those who don't like the text mode of Telnet, there is a simple monitoring utility for Windows: http://www.mujweb.cz/www/jirka36/aptest2.zip. Thanks to some people from CZFREE.net (http://www.czfree.net/forum/showthread.php?postid=78786#post78786) forum this utility was written in about 30 minutes. Don't expect too much but I think it could be pretty useful for antenna positioning. It will work with latest patched firmware 1.6.5.3-2 for WL-500g from Oleg. firmware 1.6.5.3-2 (http://wl500g.info/showthread.php?s=&threadid=135) :)
Screenshot: http://www.czfree.net/forum/attachment.php?s=&attachmentid=292&size=full
P.S
Jmeno = Name (of Admin)
Heslo = Password
Update - a new link to slightly debugged version.
Originally posted by Technik
For those who don't like the text mode of Telnet, there is a simple monitoring utility for Windows: http://www.volny.cz/jonasp/APtest.zip. Thanks to some people from CZFREE.net (http://www.czfree.net/forum/showthread.php?postid=78786#post78786) forum this utility was written in about 30 minutes. Don't expect too much but I think it could be pretty useful for antenna positioning. It will work with latest patched firmware 1.6.5.3-2 for WL-500g from Oleg. firmware 1.6.5.3-2 (http://wl500g.info/showthread.php?s=&threadid=135) :)
Screenshot: http://www.czfree.net/forum/attachment.php?s=&attachmentid=292&size=full
P.S
Jmeno = Name (of Admin)
Heslo = Password
Nice Utility, althought he user interface is somewhat "Spartian". I have been to the mentioned Czech site, however my Czech is as bad as my Russian, so I will post my experiences here.
* When refresh rate set to maxium the program will/can crash ("-4 is not a valid integer value")
* There is no control to select a different AP when more than 1 AP is available, even not with the AP field (looking at the terminal output it is screwing up the AP name).
:) Yes I know, the utility is a bit buggy at the moment and I have already reported the problems to the forum. Perhaps I will get a source code from author and will be able to fix the issues soon. ;)
Update - the source code was not released but some update was promised by Author - let's wait... :) In the meantime there's a new link to slightly debugged version above.
fabiosantos
29-03-2004, 22:57
The link to the APP is broken :confused:
Originally posted by fabiosantos
The link to the APP is broken :confused:
Well, so please use the old link to previous version... In fact there's no difference - there is a serious bug still. Unfortunately Author did not release source codes nor any other update yet and I don't have time to write down the similar software from the beginning. :(
:(
can't find this tool anywhere on the net!
can someone please post a wotking url for a "wl scan" monitoring tool?
thanks,
:rolleyes:
I can send you the scan tool you were talking about. matej.liszka@seznam.cz My latest tool: this thread (http://wl500g.info/showthread.php?p=27976&posted=1#post27976)
I can send you the scan tool you were talking about. matej.liszka@seznam.cz My new tool (already without bugs, I hope :) ): screenshot (http://wl500g.info/attachment.php?attachmentid=708&d=1138138557) and download (http://wl500g.info/attachment.php?attachmentid=707&d=1138138514).
Hi, very good job, very good utility for every WL-5xx owner. But one question: Is normal this program is freezing under Win98?
It is possible. The tool has not been tested under Windows 98. I just run it in XP. Maybe later I can test it also in 98...
Seems to hang under Win2k as well...
(It's still a very good job ! :-) Thanks !)
Now it should work. Here (http://wl500g.info/showthread.php?p=27976&posted=1#post27976)