MN-700 flashes but does not blink

[fargodude]

Hello all the title says it all. Everything seems to flash ok, but no power led, no blink. No ping, no TFTP, no asus util

I have tried to download a known good cfe.bin from Oleg just to see if that was the problem, but that did seem to be the problem.

Maybe is the way I am doing it.
I am trying to use HairyDairy v4.8 util on Ubuntu. Is this why it not working?
I do the erase:cfe, kernel, nvram then the flash:cfe.

Does anyone know if this works.

I did see some posts about changing the code and something about "R6" but I don't know if that should be the next step.

I also have a ByteblasterMV cable I was thinking about trying to use as my cable might be on the long side.

Do all versions of the MN-700 have the same hardware other than the MAC change?

Thanks for any input you can give.
-Fargodude

[fargodude]

Does anyone have any suggestions for me?

I have tried everything.

I think maybe were I have gone wrong is that I did a
-erase:cfe
-erase:nvram
-erase:kernel
before I did a ./wrt54g -flash:cfe

So I am still stuck. When I do a ./wrt54g -flash:cfe everything seem to work, but when I try to ping it I get nothing. I also don't see a power light.

PLEASE PLEASE can someone help me?

Thanks
Dustin

[fargodude]

I thank everyone for there help in this matter. But after much agony I fixed it myself.

To flash this router, I have found you must use a utility called
"wrt54 modified" or something to that effect.

Everything works great then.

It also appears that the mega version is to large for this unit. I chose the vpn version and everything works great.

Thanks to all the hackers that put this thing together.