PDA

Bekijk de volledige versie : Disk SYSTEM Health Report


batmanone
15-10-2007, 20:05
Hi All,

When try to run the disk health check (http://192.168.1.1/disk_management/full_health_details.asp?disk=SYSTEM), error message as attached appear, any idea?

The harddisk can't spin down now, which have no problem before (I have install KC's firmware with the spin down option)

Thanks
LeperKing
15-10-2007, 22:33
I think the default spindown instructions in KC's rc.local switchs off SMART. You can't get the HEALTH report without SMART enabled. I think this is because SMART wouldn't let the harddisk spindown for extended periods.

LK
kfurge
16-10-2007, 02:35
Yes, you're right.

- K.C.
batmanone
20-10-2007, 03:07
I think the default spindown instructions in KC's rc.local switchs off SMART. You can't get the HEALTH report without SMART enabled. I think this is because SMART wouldn't let the harddisk spindown for extended periods.

LK

Thanks LeperKing and KC. After disable the spindown instruction, I am able to get the HEALTH report.

I have another problem face now, the harddisk is unable to spindown even I enable the spindown instruction and disable the media sever winthin the web GUI. The problem appear after I have a power reset on the NAS. Anything I needed to check ?

Thanks
batmanone
22-10-2007, 06:00
Thanks LeperKing and KC. After disable the spindown instruction, I am able to get the HEALTH report.

I have another problem face now, the harddisk is unable to spindown even I enable the spindown instruction and disable the media sever winthin the web GUI. The problem appear after I have a power reset on the NAS. Anything I needed to check ?

Thanks

I have post the spin down problem to the firmware group as follow, and lets end this thead here. Thanks!

http://www.wl500g.info/showthread.php?p=66680#post66680