PDA

Bekijk de volledige versie : Can we use WL-HDD as a PPPOE router?



brianyu
19-09-2007, 13:41
Dear ALL,

I had study this forum since I had WL-HDD2.5 last month.

Now I use ADSL as my internet connection at home, and one Linksys WRT54GC router (1M flash + 4M RAM, can not flash to DD-WRT) and one WL-HDD.
I use WL-HDD as BT client (Ctorrent + Seaky's CTCS), Samba Server and SSH, I also add 3322.org as my dynamic DNS service. ( Thanks everyone in this forum!) and I also use one VOIP service by Linksys PAP2 which connected to Linksys WRT54CG router directly by ethernet cable.

Please check the attachment home.jpg for the network diagram.

All of these system are running pretty good expect when the VOIP voice even can not work when I using BT!

Because Linksys WRT54GC router does not support any type of QoS and can not upgrade firmware to DDWRT. Can I use WL-HDD as a QoS router and PPPOE client?

wengi
19-09-2007, 15:34
Hi,

You should change the thread title to QOS-router.
Have a look at this: http://wl500g.info/showthread.php?t=752

wengi

brianyu
20-09-2007, 06:33
Hi,

You should change the thread title to QOS-router.
Have a look at this: http://wl500g.info/showthread.php?t=752

wengi

Thanks Wengi,
What I want the first is: replace linksys wrt54cg with WL-HDD, then bridge WL-HDD to linksys wrt54cg.
So the first question is : does WL-HDD support PPPOE client, because I want to use it connect to my ADSL Modem.

---ADSL Modem <----> WL-HDD (((o))) Linksys wrt54cg <----> PC & Laptop

wengi
20-09-2007, 07:26
Yes, it does!
But your problem _may_ be the WLAN Bridge.
I have read some issues with WPA and other routers.
Search the forum.

wengi